Professional textile DTF printer
Professional textile DTF printer with 6 heads and a 57 cm print width, for custom t-shirts and sweatshirts and large-scale production.
The RS PRO 6 from RS Transfer Pro is a professional textile DTF (Direct to Film) printer with 6 heads and a 57 cm print width. Its 8-colour system adds red, green, blue and orange to CMYK and white, which widens the colour gamut and makes it possible to reproduce approximately twice as many Pantone shades as a conventional CMYK system.
It produces up to 35 linear metres per hour in production mode and 20 in high quality, with REACH-certified textile pigment inks. It serves both for custom t-shirts and sweatshirts and for large-scale production, without large inventories or aggressive chemical pre-treatments.
How does DTF printing work?
The design is printed on a special film, adhesive powder is applied and it is transferred to the fabric with heat using a heat press. The result is bright, intense prints that resist cracking, peeling and repeated washing (up to 60 °C, with Oeko-Tex Standard 100 certification).
What fabrics does it print on?
Cotton, polyester, blends, denim, leather and nylon.
Versions
Also available in the Pro 6 MC series, with 2 × CMYK + 2 × RGBO + 2 × white colours.
| Number of heads | 6 |
|---|---|
| Print speed | up to 35 linear m/h (production mode) / 20 linear m/h (high quality) |
| Print width | 57 cm |
| Inks | REACH-certified textile pigment inks |
| Colours | 3xCMYK + 3xWhite |
Price
On quotation
Frequently asked questions
About the Professional textile DTF printer
What is the RS PRO 6?
The RS PRO 6 from RS Transfer Pro is a professional textile DTF (Direct to Film) printer with 6 heads and a 57 cm print width. It serves both for custom t-shirts and sweatshirts and for large-scale production.
How does DTF printing work with the RS PRO 6?
The design is printed on a special film, adhesive powder is applied and it is transferred to the fabric with heat using a heat press. The result is bright, intense prints that resist cracking, peeling and repeated washing.
What fabrics does this textile DTF printer print on?
The RS PRO 6 prints on cotton, polyester, blends, denim, leather and nylon.
What is the difference between the RS PRO 6 and a UV DTF printer?
The RS PRO 6 is textile DTF: the transfer is applied to the garment with heat and a heat press. UV DTF is for rigid objects and is applied cold; in the IBPRINT catalogue it is produced by the RS Pro 9060 UV Hybrid with its roll-to-roll module.
Are there other versions of the RS PRO 6?
Yes, there is also the Pro 6 MC series. The RS PRO 6 is sold on quotation: tell us the fabrics you work with and your production volume, and we will advise you on the configuration.
Request a quote
Tell us who you are and what part you decorate. We will send you technical information and a price, with no obligation.
