S250S4 – 4-colour automatic screen printing machine
Four-colour automatic screen printing machine for cylindrical products, with or without registration: bottles, jars, flexible tubes, etc.
- Automatic loading with conveyor belt and robot. The parts lie horizontally on the conveyor belt.
- Automatic pre-registration for parts that require it.
- XY servo-driven shuttle. Parts can be stopped at any point.
- Servo-driven printing system, with linear guides and threaded bolts. The left and right movements of the print head and the rotation of the parts are driven by servo motor. All parameters are set via the touch screen, with no need for any additional tool or fixture.
- Quick and easy format changeover between products. There is only one holder. All other parameters are set via the touch screen.
- High-efficiency automatic electrode UV drying system, made in Europe.
- Mitsubishi control PLC and Proface touch screen.
- Safety elements in line with CE regulations.
- Automatic print head locking system for optimum print quality.
- Automatic unloading.
- All the servo motors are Mitsubishi.
| Model | S250S4 |
|---|---|
| Power | 380V AC, 3-phase, 50/60 Hz |
| Air consumption | 5 – 7 bar |
| Maximum print speed | 4 colours: 5-6 parts/minute 2 colours: 10-12 parts/minute |
| Diameter of the part to be printed | 25 – 80 mm |
| Length of the part to be printed | Up to 250 mm |
| Print stroke (left/right) | 250 mm |
Price
On quotation
Frequently asked questions
About the S250S4 – 4-colour automatic screen printing machine
What speed does the S250S4 screen printing machine reach?
According to its technical sheet, the S250S4 prints 5 to 6 parts/minute in 4 colours and 10 to 12 parts/minute in 2 colours.
What part size does the S250S4 accept?
The S250S4 prints cylindrical products from 25 to 80 mm in diameter and up to 250 mm long, with a print stroke of 250 mm, such as bottles, jars and flexible tubes.
How are parts loaded on the S250S4?
The S250S4 loads automatically with a conveyor belt and robot; the parts travel horizontally on the belt. A shuttle driven by an XY servo motor can then stop them at any point.
What is needed to change product on the S250S4?
There is only one holder: all other parameters, including the print head movements and the servo motor part rotation, are set on the Proface touch screen without tools.
How do I request a quote for the S250S4?
The S250S4 is sold on quotation. Send us the container you want to print, its material, the number of colours and the expected volume, and we will advise you.
Request a quote
Tell us who you are and what part you decorate. We will send you technical information and a price, with no obligation.
